What are passive room doors and windows
2024/04/26
With the end of the 23rd International Passive House Conference, a new type of house, "passive house" has begun to enter people's lives. Passive houses have very high requirements for the heat insulation and thermal insulation performance of walls and floors, especially The requirements for the doors and windows of houses are even higher. Therefore, passive house doors and windows have also appeared on the market. The following article will give you a detailed introduction to the doors and windows of passive houses.
What are passive house doors and windows?
Passive room doors and windows are energy-saving doors and windows based on passive design. This energy-saving doors and windows does not refer to energy-saving standards, but a door and window design system that takes into account efficiency, architectural appearance and good performance. When designing, it uses the natural sunlight, wind, temperature and humidity as much as possible to reduce the consumption of natural energy. Through scientific planning and design, it adapts to the architectural environment according to local conditions, in order to improve and create a more beautiful living environment, this kind of house basically does not need to increase refrigeration and heating equipment, it can achieve warm winter and cool summer.
What are the requirements of passive room doors and windows?
First of all, there is a high requirement for the transparency of the external window. The heat transfer coefficient of the glass should at least meet the requirements of k<= 0, the total transmittance of solar energy should be greater than 0, and the selection coefficient of the glass is the larger the better, so as to ensure sufficient light transmittance. Glass material selection as much as possible to choose a good sealing, half of the use of three good durability of the sealing material for sealing.
The above is the introduction of the doors and windows of the passive house. This is a more scientific and new housing design method. I believe everyone has understood the doors and windows of the passive house after reading this article. You can try to install the doors and windows of the passive house, which will definitely improve your life experience.
Why do we all buy aluminum doors and windows?
Although the surface of aluminum alloy is made of a variety of metals, but, in fact, the cost of aluminum alloy is very low, in the market, the general 200, 300 side of the aluminum alloy doors and windows is very much, and the performance can also be fully satisfied The needs of consumers at the grassroots level.
Advantages of Broken Bridge Aluminum Alloy Insulation Doors and Windows
In winter, the window frame with heat insulation strip can reduce the heat loss through the window frame by 1/3; in summer, if there is air conditioning, the window frame with heat insulation strip can reduce the energy loss more.
If we choose the broken bridge aluminum doors and windows, did not do a good job of installation, then its effect will certainly not be particularly good. Therefore, the installation of doors and windows must pay special attention to process details. So, what are the specific problems to pay attention to? The following broken bridge aluminum doors and windows manufacturers will introduce you to the specific content.
National unified customer service hotline
Address: 118 Ring Road, Yuhuan City, Zhejiang Province, China
Telephone:0573-85075399 / 85083299
Fax: 0573-85097299
©All Rights Resserved of Yongdexin Doors and Windows Technology (Taizhou) Co., Ltd.
