What are the differences between passive room doors and windows and ordinary doors and windows?
2024/04/26
Since ancient times, the design of doors and windows of houses is the main content of building houses. It can not only be beautiful, but also bring people a very warm environment, so that we can get more happiness at home after work. A group of data shows that the energy consumption of building doors and windows accounts for more than 50% of the total energy consumption of buildings, so the design of building energy conservation mainly starts with the structure of doors and windows, because unreasonable installation of doors and windows will cause excessive energy consumption of buildings and waste of resources. Passive house doors and windows are low-energy doors and windows. Let's take a look at the difference between passive house doors and windows and ordinary doors and windows in the following article!
1. appearance difference
Ordinary doors and windows are generally aluminum alloy or plastic steel materials, including one or two layers of ordinary hollow glass, mainly with translational switches. The appearance of the doors and windows of the passive room is more elegant. Some are designed with wood grain, which can be consistent with the interior decoration. The glass it uses is thicker than ordinary doors and windows, with better light transmittance and UV isolation functions. There are also two switch modes, with better sound insulation and dustproof effects.
Different 2. structure
The doors and windows of the passive room are more insulated and warm than ordinary doors and windows, mainly because the doors and windows of the passive room use Low-E glass or vacuum glass structure. This low-e glass has better heat insulation and sound insulation effects, which is helpful to maintain the indoor temperature.
In short, passive room doors and windows as a new type of doors and windows system, from the traditional doors and windows design techniques, from the material, and the process has a qualitative improvement, can make the house in the natural state less affected by the external environment, winter even without heating equipment can maintain the temperature of 20 degrees Celsius inside the house, reducing the energy consumption of the house.
Why do we all buy aluminum doors and windows?
Although the surface of aluminum alloy is made of a variety of metals, but, in fact, the cost of aluminum alloy is very low, in the market, the general 200, 300 side of the aluminum alloy doors and windows is very much, and the performance can also be fully satisfied The needs of consumers at the grassroots level.
Advantages of Broken Bridge Aluminum Alloy Insulation Doors and Windows
In winter, the window frame with heat insulation strip can reduce the heat loss through the window frame by 1/3; in summer, if there is air conditioning, the window frame with heat insulation strip can reduce the energy loss more.
If we choose the broken bridge aluminum doors and windows, did not do a good job of installation, then its effect will certainly not be particularly good. Therefore, the installation of doors and windows must pay special attention to process details. So, what are the specific problems to pay attention to? The following broken bridge aluminum doors and windows manufacturers will introduce you to the specific content.
National unified customer service hotline
Address: 118 Ring Road, Yuhuan City, Zhejiang Province, China
Telephone:0573-85075399 / 85083299
Fax: 0573-85097299
©All Rights Resserved of Yongdexin Doors and Windows Technology (Taizhou) Co., Ltd.
