What are the installation requirements of passive room doors and windows?
2024/04/26
Passive house is a new type of house that is relatively popular at present. It has the characteristics of low energy consumption. The door and window system of passive house is an effective means to improve passivity and reduce energy consumption. The following article will give you a detailed introduction to the installation requirements of doors and windows of passive house.
Check the 1. before installation.
Before installing the doors and windows of the passive house, what we need to do is to check the doors and windows and observe whether the surrounding environment is suitable for installation. If the old glass needs to be removed, try to make preparations and install it step by step according to the procedure.
2. observe the structure of doors and windows
It is necessary to check whether the steel lining structure of passive doors and windows meets the standard. Generally, doors and windows use 1.20 steel linings, but most of these are difficult for us to see. Therefore, some door and window companies may make fraud, resulting in poor steel strength. Therefore, lining steel needs to be inserted in sections to improve the overall reinforcement effect during installation. During the installation process, it is recommended that you use a level or wire hammer to measure the verticality of the doors and windows of the passive house, which can effectively avoid errors.
3. make sure the doors and windows are neat and clean
The doors and windows of the passive room shall ensure that the glass is flat, free of spots and watermarks, especially the appearance of the glass shall be kept clean and tidy, dust shall not enter the glass interlayer, and the installation partition shall not be tilted to ensure that the doors and windows have high sealing and air tightness.
The above is an introduction to the installation requirements of passive house doors and windows. Thank you for reading.
Why do we all buy aluminum doors and windows?
Although the surface of aluminum alloy is made of a variety of metals, but, in fact, the cost of aluminum alloy is very low, in the market, the general 200, 300 side of the aluminum alloy doors and windows is very much, and the performance can also be fully satisfied The needs of consumers at the grassroots level.
Advantages of Broken Bridge Aluminum Alloy Insulation Doors and Windows
In winter, the window frame with heat insulation strip can reduce the heat loss through the window frame by 1/3; in summer, if there is air conditioning, the window frame with heat insulation strip can reduce the energy loss more.
If we choose the broken bridge aluminum doors and windows, did not do a good job of installation, then its effect will certainly not be particularly good. Therefore, the installation of doors and windows must pay special attention to process details. So, what are the specific problems to pay attention to? The following broken bridge aluminum doors and windows manufacturers will introduce you to the specific content.
National unified customer service hotline
Address: 118 Ring Road, Yuhuan City, Zhejiang Province, China
Telephone:0573-85075399 / 85083299
Fax: 0573-85097299
©All Rights Resserved of Yongdexin Doors and Windows Technology (Taizhou) Co., Ltd.
